PLEASE NOTE: we do not match colours to factory brand plastics.
Nice and easy! Customize your number plates with your name and race number suited for your selected bike. Choose a background and number colour then a trim colour.
The decals are printed by us at 24MX with the highest quality modern printing technology. If you follow our simple installation instructions, these decals will sit firmly on your plastics!
Specify your start number and the name you want on your plates, then choose a background colour and trim colour.
- Nice and easy!
- High quality graphics that will not crack, do not change colour and will not fall off.
NOTE!
The size of the numbers will be adjusted to fit the number of digits you have entered.
All names are printed in capital letters no matter how you register the name with us, ie, "Andersson" is printed "ANDERSSON". If you choose the same trim colour as the background colour we will adjust them to be two different shades. For example, light blue and dark blue.
All the templates we use are from American standard OEM plastics
Installation:
1. Firstly clean the plastics with decal or brake cleaner. NOTE! Also new plastics need to be cleaned.
2. Heat the plastic with a heat gun or hair dryer (do not heat the decals).
3. Align the decal before you mount it. Attach it with masking tape, then remove some of the backing paper to adhere to the plastics.
4. Fit the decal without touching the adhesive.
5. Begin to attach the decal starting from one corner, rubbing out all the air bubbles before they get too far from the edge.
6. Rub the entire decal with pressure, especially the edges, with a cloth so that the decal glue sticks firmly to the plastic.
*Custom decals are non-returnable.
"Please note! All of our decals are designed for mounting on OEM plastics. Please check your plastics are standard for your particular bike model, or you may run the risk of your templates not fitting correctly".
Nice and easy! Customize your number plates with your name and race number suited for your selected bike. Choose a background and number colour then a trim colour.
The decals are printed by us at 24MX with the highest quality modern printing technology. If you follow our simple installation instructions, these decals will sit firmly on your plastics!
Specify your start number and the name you want on your plates, then choose a background colour and trim colour.
- Nice and easy!
- High quality graphics that will not crack, do not change colour and will not fall off.
NOTE!
The size of the numbers will be adjusted to fit the number of digits you have entered.
All names are printed in capital letters no matter how you register the name with us, ie, "Andersson" is printed "ANDERSSON". If you choose the same trim colour as the background colour we will adjust them to be two different shades. For example, light blue and dark blue.
All the templates we use are from American standard OEM plastics
Installation:
1. Firstly clean the plastics with decal or brake cleaner. NOTE! Also new plastics need to be cleaned.
2. Heat the plastic with a heat gun or hair dryer (do not heat the decals).
3. Align the decal before you mount it. Attach it with masking tape, then remove some of the backing paper to adhere to the plastics.
4. Fit the decal without touching the adhesive.
5. Begin to attach the decal starting from one corner, rubbing out all the air bubbles before they get too far from the edge.
6. Rub the entire decal with pressure, especially the edges, with a cloth so that the decal glue sticks firmly to the plastic.
*Custom decals are non-returnable.
"Please note! All of our decals are designed for mounting on OEM plastics. Please check your plastics are standard for your particular bike model, or you may run the risk of your templates not fitting correctly".