Please note: we cannot match the colours to factory brand colours.
Includes decals for these plastics:
-Radiator wings
-Front fender
-Rear fender
-Fork protector
-Air box
-Swing arm
-Number plates
-Tank
For this kit we also offer custom made number plates that are made to match your decal kit to give you that real factory look!
*PLEASE NOTE: the tank decals must be perforated before application! If you forget to do this, the decal could get bubbly from fuel gases. Be sure to perforate the decal thoroughly with a box cutter or razorblade before you apply it to the tank.
Enjoy's high-quality decals are durable and easy to apply. After the decal is printed, it is laminated with an incredibly durable and transparent plastic material that protects against the elements. Following this, an acrylic-based adhesive is applied; this enables the decals to adhere strongly to the bike, but also leaves no residue once removed.
Mounting:
Make sure to clean your plastics thoroughly with our pre-decal or brake cleaner; this applies to even new plastic, which has oil residue left on the surface after manufacturing.
These decals should be applied in room-temperature conditions!
Double-check to see that the decal is centred on the plastic before application. After this, you can peel away the protective film from one of the corners and apply pressure to the decal. It is a good idea to have a cloth or sponge handy to press with, as these glide easily over decals.
After the decal is applied, lightly go over the decals again in linear strokes to remove air bubbles. For areas with stronger curves and edges, it is recommended that you carefully warm up the decals with the hair dryer or heat gun to make them more flexible.
Once mounting is complete, let the plastics rest for 24 hours in a room-temperature area before riding for the first time, as this ensures they will be stuck securely.
NOTE: custom made decals CANNOT be returned!
Includes decals for these plastics:
-Radiator wings
-Front fender
-Rear fender
-Fork protector
-Air box
-Swing arm
-Number plates
-Tank
For this kit we also offer custom made number plates that are made to match your decal kit to give you that real factory look!
*PLEASE NOTE: the tank decals must be perforated before application! If you forget to do this, the decal could get bubbly from fuel gases. Be sure to perforate the decal thoroughly with a box cutter or razorblade before you apply it to the tank.
Enjoy's high-quality decals are durable and easy to apply. After the decal is printed, it is laminated with an incredibly durable and transparent plastic material that protects against the elements. Following this, an acrylic-based adhesive is applied; this enables the decals to adhere strongly to the bike, but also leaves no residue once removed.
Mounting:
Make sure to clean your plastics thoroughly with our pre-decal or brake cleaner; this applies to even new plastic, which has oil residue left on the surface after manufacturing.
These decals should be applied in room-temperature conditions!
Double-check to see that the decal is centred on the plastic before application. After this, you can peel away the protective film from one of the corners and apply pressure to the decal. It is a good idea to have a cloth or sponge handy to press with, as these glide easily over decals.
After the decal is applied, lightly go over the decals again in linear strokes to remove air bubbles. For areas with stronger curves and edges, it is recommended that you carefully warm up the decals with the hair dryer or heat gun to make them more flexible.
Once mounting is complete, let the plastics rest for 24 hours in a room-temperature area before riding for the first time, as this ensures they will be stuck securely.
NOTE: custom made decals CANNOT be returned!